1. Place the scaling tip of choice onto the handpiece. Use the scaler tip wrench provided to securely tighten the tip. When placing the tip onto the handpiece, ensure it screws on smoothly, do not force it, as it may result in cross threading the handpiece and the tips. Use care when tightening the tips, excessive torque may cause damage to the tip and/or the handpiece.

Refer to Fig. 2

2. Turn the power control dial down to the lowest setting.

3. Flip the water control switch to the ON position. Using the Water Control Knob, slowly turn in a counterclockwise
motion until 2-3 drops of water per second are coming out
of the tip.

4. Turn the Power Control Dial up to the intended operating range, according to the tip being used. A small amount of water creates a very fine mist which produces a “halo” effect around the tip providing improved visibility for the used.